Casework Typical Sections

TYPICAL MATERIALS

SURFACE FINISHES:
3/4” thick panels are permanently laminated with wear resistant white or black melamine surfacing to inside face, exposed exterior face is finished with selected wear resistant melamine, plastic laminate or wood veneer.

EDGING:
Color matched 1mm PVC to match adjacent surfaces.

CORE MATERIALS:
Particle board cores of the highest quality 45# industrial particle board.

HARDWARE:
Drawer slides – White Epoxy Coated, self closing with Silent Glide
rollers for smooth quiet ride. Integrated drawer slide and side panel.
Hinges – concealed full-overlay self closing hinge, three way adjustment.
Shelf Pins – high strength plastic with steel pin.
Pulls – brushed aluminum, 3 ½” wire pull.

COUNTERS:
1-1/2″ thick (3/4″ particle board w/ 3/4″ build up). 4″ high back splash. Laminated with horizontal grade selected laminate. 1/4 overhang at ends.

END PANELS:
3/4″ thick wear resistant melamine surfaced panels with precision machining for hardware and cabinet members.

TIE DOWNS:
3/4″ particle board, front tie-down banded at front edge.

BOTTOM:
3/4″ particle board, wear resistant melamine surface interior, laminated front edge, balancing sheet on underside.

ADJUSTABLE SHELVES:
3/4″ thick wear resistant melamine surfaced panels, 1mm PVC edge banded front edge. (1” thick for 32” or larger).

BACKS:
½” thick wear resistant melamine surfaced particle board, sized to fit precisely in back construction.

DRAWERS:
Drawer body is a combination of the Grass integrated Zargen drawer slide/drawer side system with a ¾” wear
resistant melamine bottom and back panel forming and strong, durable and adjustable drawer system.

SEPARATE BASE:
3/4″ plywood, 4″ x 2″ recessed toe space. 1” inset at finished ends. Base ships in 8 lengths.